Brand Name:
liangui
Model Number:
EI-100
The EI-100 inserts E & I silicon steel laminations into transformer coil bobbins under PLC control. Positioning accuracy is ±0.02 mm, stacking accuracy ±0.1 mm, and cycle time is adjustable from 1 to 60 seconds, up to 250 stacks per minute. It is built for manufacturers of single-phase distribution and grid-side transformers, where a core that leaves the factory may stay energized in the field for twenty years and the only protection against premature failure is the consistency of the stack inside it.
Industrial buyers check incoming cores against a tolerance. Grid buyers reason differently: a distribution transformer runs 24 hours a day for decades, and its losses are billed every hour. A core with uneven lamination alignment shows higher eddy and stray losses, more audible noise, and a shorter insulation life — none of which appear at the factory test bench, and all of which the utility remembers.
The EI-100 addresses this at the structural level:
The EI-100 size range is the workhorse of the single-phase distribution band and a common choice for pole-mounted and pad-mounted transformer cores. Production here is defined by moderate order sizes of high-consequence designs: a 500-core order is not a small batch, but every core in it carries the same duty expectation as a machine built by the utility's preferred supplier. Consistency across that whole order — not peak speed — is what wins the repeat contract.
The frame is bolted high-strength structural steel, so the guidance parts that see the most wear can be replaced individually; a worn guide is a maintenance item, not a machine-out-of-service event. The machine draws 30-60 W of power, weighs 70 kg, and runs from 220V / 380V 50/60 Hz with 220V and 24V grounding — no dedicated foundation, compressed-air upgrade or new power drop required, so it installs where the existing winding line already is.
| Model | EI-100 |
| Typical application | Single-phase distribution and grid-side transformer cores |
| Stacking accuracy | ±0.1 mm |
| Positioning accuracy | ±0.02 mm |
| Stacking speed | Up to 250 stacks per minute |
| Cycle time | 1 to 60 seconds, adjustable |
| Control system | PLC control with touch screen interface |
| Core components | PLC |
| Power | 30~60 W |
| Power supply | 220V / 380V, 50/60 Hz |
| Grounding | 220V grounding, 24V grounding |
| Construction material | High-strength structural steel |
| Material compatibility | Suitable for various EI lamination materials |
| Machine weight | 70 kg |
| Load weight | 40 kg to 100 kg |
| Operating temperature | 0°C to 45°C |
| Safety features | Emergency stop, safety guards |
| Certification | CE |
| Minimum order quantity | 1 unit |
| Warranty | 12 months from shipping date |
Minimum order is one unit. Payment is by T/T. Standard delivery is 1-15 working days depending on configuration and stock position, packed in export-grade plywood cases. Installation and operator training are provided free online; on-site attendance is quoted on request.
If you manufacture distribution transformers and need stacking consistency that survives a twenty-year duty cycle, send us your core drawings and monthly volume. We will confirm the guidance configuration, estimate the achievable stacking rate, and return a quotation with the wear-parts list attached.
Send your inquiry directly to us