logo
Home > Products > EI Lamination Stacking Machine >
Automatice EI 175 lamination stacking machine for transformer core

Automatice EI 175 lamination stacking machine for transformer core

Place of Origin:

china

Brand Name:

liangui

Model Number:

lg-175

Contact Us
Request A Quote
Product Details
Payment & Shipping Terms
Minimum Order Quantity
1
Price
18888
Packaging Details
wooden carton
Payment Terms
T/T
Supply Ability
1000
Product Description
EI-133(175) Automatic Transformer Core Stacking System for High-Volume EI-133 Core Production
ModelEI-133(175)
Stacking accuracy≤0.05 mm
Stacking factor≥97%
Output500-800 pieces per hour
Sheet thickness0.23-0.5 mm
Installed base2,000+ units in China
Net weight90 kg
Warranty12 months

The EI-133(175) automated stacking system, designed and built by liangui, is engineered for high-volume fabrication of EI-133 transformer cores. The machine runs on a PLC-based intelligent control architecture, ensuring user-friendly operation and dependable, consistent output. When compared to manually operated crank machines, this system multiplies throughput by a factor of eight to ten and raises core consistency above 95 percent, all while driving down labor requirements. It represents a fundamental production asset for mid-size and large transformer manufacturers.

Our stacking machines accommodate standard EI laminations across a wide envelope - from EI-19 through EI-300. Should your application require a dimension beyond this spectrum, please reach out to discuss tailored engineering solutions. The system processes lamination thicknesses from 0.3 mm to 0.5 mm, achieving stack rates up to 350 pieces per minute in either manual or automated mode, with interleaving fully maintained for superior core properties. We also supply bespoke OEM lamination dimensions aligned to your specific workflow.

Key Differentiators
Independent patent portfolio - The product is the result of internal R&D, and we own the complete set of patents and intellectual property rights covering both the external design and the internal core mechanism.
Jam-resistant operation - Built specifically to address the sector-wide challenge of material jamming during stacking, this machine delivers markedly smoother, interruption-free production. Fewer stoppages and less troubleshooting translate directly into higher overall output.
Intuitive PLC control system - A touch-screen PLC interface makes parameter configuration straightforward. Operators can freely set stacking speed, target piece count, and other critical process variables to suit real-time shop floor demands.
Accelerated throughput - Running at a top adjustable speed of 12 pieces per second, the system achieves twice the output of traditional hand-operated machines, and it drastically reduces time spent on sheet loading.
Minimal training requirement - The learning curve is extremely short. New team members need only grasp sheet replenishment and the startup sequence; most are fully productive after a 15-minute orientation.
Durable construction - Every unit is assembled from premium-grade materials and components. A 12-month warranty comes standard, and we offer a satisfaction-guaranteed return policy at any time.
Exceptional Precision and Consistent Results
  • Stacking accuracy within 0.05 mm and a stacking factor no less than 97% - the two numbers your no-load test is actually measuring against.
  • Core loss of just 1.3 W/kg (measured at 1.7 T, 50 Hz) on cores produced on our stackers, so the efficiency class you designed for is the class the unit is tested to.
  • No-load current of finished transformers under 0.5% of rated value - the practical consequence of a tight, uniform stack with a controlled air gap.
  • Batch-to-batch variation held within ±2%, which is what makes a framework agreement with a machine builder or a data-centre equipment supplier defensible.
Proven Safety Track Record

With over 2,000 installations across China and more than a decade of field operation, the machine has maintained a flawless safety history with zero recorded incidents. For environments demanding heightened protection, optional add-ons like extra guarding and safety light curtains are available - worth specifying at order stage if your plant runs an EHS audit.

Technical Specifications
Product nameAutomatic EI lamination stacking machine
ModelEI-133(175)
Stacking accuracy≤0.05 mm
Stacking factor≥97%
Production output500-800 pieces per hour
Compatible sheet thickness0.23 mm - 0.5 mm
Electrical supplyInput 220-240 V AC, 50/60 Hz; Output 60 V AC, 24 V DC
Power consumption30-60 W
Dimensions (L x W x H)Machine 113 x 53 x 80 cm; packaged 122 x 64 x 90 cm
Net / gross weight90 kg / 130 kg
Positioning accuracy±0.02 mm
ControllerPLC with touch screen
Data interfaceRS232 port (upload, download and remote monitoring)
Compressed air requirement0.3-0.6 MPa
Warranty12 months
What You Can Verify Before You Order

This is a machine you buy once and run for a decade, so the numbers that matter are the ones you can check on your own cores, in your own plant. These are the points we put in writing before the order and re-check after delivery:

Verification pointWhat we confirm
Stacking accuracy on your coresAccuracy within 0.05 mm and stacking factor of at least 97% demonstrated on a first-off core made from your own EI-133 sheets.
Core loss and no-load currentCores produced to 1.3 W/kg core loss at 1.7 T / 50 Hz and no-load current under 0.5% of rated value, with batch variation within ±2%.
Throughput claim500-800 pieces per hour on the configuration shipped, with the 12 pieces per second top speed adjustable at the touch screen.
Thickness range0.23 mm to 0.5 mm sheet handled with interleaving fully maintained, checked on your material before shipment.
Size envelope and OEM toolingStandard EI-19 through EI-300 covered; bespoke OEM lamination dimensions quoted against your drawing.
Traceability interfaceRS232 port for upload, download and remote monitoring, so production data can be pulled into your own system rather than typed up.
Safety packageStandard guarding plus optional extra guarding and safety light curtains, specified at order stage if your plant has an EHS audit.
Warranty and returns12-month warranty as standard, with a satisfaction-guaranteed return policy; installation, packing and commissioning confirmed in the quotation.
Questions Buyers Ask Before Ordering

Your quoted accuracy is tighter than most machines on the market. Is 0.05 mm realistic in production?

It is the figure we demonstrate on a first-off core made from your own laminations: stacking accuracy within 0.05 mm, positioning ±0.02 mm, and a stacking factor of at least 97%. Batch-to-batch variation is held within ±2%, which is the number that decides whether your no-load test passes every unit or only the sample.

What is the actual output per shift?

500-800 pieces per hour on the shipped configuration, with a top adjustable speed of 12 pieces per second from the touch screen. Against a hand-crank machine the throughput multiple is eight to ten times, and sheet loading time drops sharply.

Our operators are not technicians. How long is training?

Short. New team members need only learn sheet replenishment and the startup sequence, and most are fully productive after a 15-minute orientation. Stacking speed and target piece count are set on the touch screen.

What about jamming, which is the usual complaint on stackers?

Jam-resistant operation was a specific design target, not an afterthought. The machine delivers smoother, interruption-free production with fewer stoppages and less troubleshooting, which is where the real output gain comes from on a long shift.

Can you handle a non-standard lamination size or thickness?

Standard coverage is EI-19 through EI-300 at 0.23-0.5 mm, and bespoke OEM lamination dimensions are supplied against your drawing. Send the drawing and we will confirm whether it is standard tooling or tailored engineering.

Check the accuracy claim on your own laminations

Send us three things and we will confirm the tooling, the expected output and the core-loss figures for your material, then return a quotation:

1. Your EI-133 lamination drawing, thickness and material grade   2. Target pieces per hour and pieces per shift   3. The acceptance values you must certify (stacking factor, core loss, no-load current)

If you also run other EI sizes in the EI-19 to EI-300 envelope, list them - one platform with OEM tooling often covers the whole range, and we will say so plainly if it does not.

Manufacturer-owned patents  |  2,000+ units installed  |  12-month warranty  |  Satisfaction-guaranteed return policy  |  Optional guarding and safety light curtains  |  RS232 data interface

Send your inquiry directly to us

Privacy Policy China Good Quality Plastic Injection Molding Equipment Supplier. Copyright © 2021-2026 Shanghai Liangui Technology Co., Ltd. . All Rights Reserved.