logo
Home > Products > EI Lamination Stacking Machine >
Automatic EI-75 lamination stacking machine

Automatic EI-75 lamination stacking machine

Brand Name:

liangui

Model Number:

EI-75

Contact Us
Request A Quote
Product Details
Materialcompatibility:
Suitable For Various EI Lamination Materials
Grounding:
220V Grounding, 24V Grounding
Powersupply:
220V / 380V, 50/60Hz
Cycletime:
1 To 60 Seconds
Operatingtemperature:
0°C To 45°C
Positioning Accuracy:
±0.02mm
Weight:
40KG~100KG
Controlsystem:
PLC Control With Touch Screen Interface
Stacking Speed:
Up To 250 Stacks Per Minute
Construction Material:
High-strength Structural Steel
Power:
30~60W
Stackingaccuracy:
±0.1 Mm
Machine Weight:
70KG
Core Components:
PLC
Safety Features:
Emergency Stop, Safety Guards
Payment & Shipping Terms
Minimum Order Quantity
1
Price
3000 USD
Payment Terms
T/T
Product Description

Automatic EI-75 Lamination Stacking Machine for Medical and Lighting Transformer Cores

The EI-75 inserts E & I silicon steel laminations into transformer coil bobbins under PLC control. Positioning accuracy is ±0.02 mm, stacking accuracy ±0.1 mm, and cycle time is adjustable from 1 to 60 seconds, up to 250 stacks per minute. It is built for manufacturers serving the medical device and lighting industries, where transformer cores are made in shifting small batches, order histories are short, and every delivered batch may need to answer for its own build record.

What Medical and Lighting Orders Demand

A power transformer plant runs long campaigns of one design. A medical power supply or lighting ballast plant rarely does. Order sizes arrive in hundreds or low thousands, the mix changes with each customer revision, and a rejected batch is not just scrap — it can hold up a certification file or a lighting project delivery.

That shifts the machine priorities away from raw speed and toward three things: repeatable accuracy across a batch, quick changeover between designs, and a stable process that does not need one specialist to babysit it.

Batch Consistency You Can Document

In these industries the question a customer asks is not only "is the core good" but "were all 800 cores made the same way". The EI-75 answers that structurally:

  • PLC-held parameter sets. Stacking rate, cycle time and accuracy settings live in the controller, not in operator habit. The parameters used for a batch are the same ones used for the repeat order six months later.
  • ±0.1 mm stacking accuracy, ±0.02 mm positioning. Lamination alignment is set at the frame guidance, so first-off and last-off cores of a batch measure within the same window — the kind of consistency that stands up to incoming inspection.
  • First-off verification. After changeover, the operator checks one core against the stack height and alignment gauge and confirms before continuing, so a setting error costs one core, not a batch.

Changeover for Shifting Order Mix

Lighting and medical customers revise designs often, and a typical week can carry several core sizes. On the EI-75, changing over is mechanical and short: swap or re-seat the lamination guidance for the new EI stack height, run the first-off check, and continue. There is no re-wiring, no controller re-teaching, and no specialist required — the regular line operator completes the change within the shift.

Because the frame is bolted high-strength structural steel, the guidance parts that see the most wear can be replaced individually, keeping the machine available between short-run orders instead of parked for repairs.

Low Operating Load, High Uptime

Medical and lighting transformer cores are small, and the EI-75 works comfortably inside its envelope: 40-100 kg load range, 30-60 W power draw, 70 kg machine weight, running from 220V / 380V 50/60 Hz with 220V and 24V grounding. It needs no dedicated foundation, compressed-air upgrade or new power drop, so it can be installed on a production floor that was never designed around heavy machinery — common in plants that moved from manual stacking as order volume grew.

Technical Specifications

Model EI-75
Typical application Medical device and lighting transformer cores, small-batch production
Stacking accuracy ±0.1 mm
Positioning accuracy ±0.02 mm
Stacking speed Up to 250 stacks per minute
Cycle time 1 to 60 seconds, adjustable
Control system PLC control with touch screen interface
Core components PLC
Power 30~60 W
Power supply 220V / 380V, 50/60 Hz
Grounding 220V grounding, 24V grounding
Construction material High-strength structural steel
Material compatibility Suitable for various EI lamination materials
Machine weight 70 kg
Load weight 40 kg to 100 kg
Operating temperature 0°C to 45°C
Safety features Emergency stop, safety guards
Certification CE
Minimum order quantity 1 unit
Warranty 12 months from shipping date

Ordering and Delivery

Minimum order is one unit. Payment is by T/T. Standard delivery is 1-15 working days depending on configuration and stock position, packed in export-grade plywood cases. Installation and operator training are provided free online; on-site attendance is quoted on request.

If you supply medical power supplies or lighting transformers and need a stacking machine that handles a shifting order mix with documented batch consistency, send us your core drawings and typical batch sizes. We will confirm the guidance configuration and return a quotation with the wear-parts list attached.

Send your inquiry directly to us

Privacy Policy China Good Quality Plastic Injection Molding Equipment Supplier. Copyright © 2021-2026 Shanghai Liangui Technology Co., Ltd. . All Rights Reserved.