Brand Name:
liangui
Model Number:
EI-85
The EI-85 inserts E & I silicon steel laminations into transformer coil bobbins under PLC control. Positioning accuracy is ±0.02 mm, stacking accuracy ±0.1 mm, and cycle time is adjustable from 1 to 60 seconds, up to 250 stacks per minute. It is specified for plants producing transformer and motor cores in high volume — household appliance, water pump, fan and small motor applications — where the cost of a bad core is measured across thousands of units per shift, not per batch.
At high volume, quality is not an inspection issue — it is an arithmetic issue. A 0.5% scrap rate on a line producing 20,000 cores per month means 100 rejected cores, each one carrying the cost of its lamination material, winding labor and rework time. Manual stacking cannot hold alignment tightly enough to keep that rate down, and operator fatigue makes the rate worse at the end of a shift than at the beginning.
The EI-85 attacks scrap at the mechanical level:
Peak stacking speed is 250 stacks per minute, but production planning rarely runs a machine at its ceiling. Cycle time is adjustable from 1 to 60 seconds, so the machine can be set to the rate the downstream winding and assembly stations can absorb continuously — the rate you can hold for a whole shift is the number that matters for monthly output planning. For appliance-class cores in the EI-85 band, most plants settle in the middle of the adjustable range and gain output by eliminating stacking-related stops rather than by raising speed.
The EI-85 draws 30-60 W of power, weighs 70 kg, and runs from 220V / 380V 50/60 Hz with 220V and 24V grounding. It needs no dedicated foundation, no compressed-air upgrade and no new power drop. For a plant converting a manual stacking station to automation, this is the difference between installing the machine this week and budgeting a facility project for next quarter.
The frame is bolted high-strength structural steel, so the guidance parts that see the most wear can be replaced individually. Wear-part replacement is a maintenance task, not a machine-down event, which protects the utilization rate that high-volume planning depends on.
| Model | EI-85 |
| Typical application | Appliance, pump, fan and small motor transformer cores, high-volume production |
| Stacking accuracy | ±0.1 mm |
| Positioning accuracy | ±0.02 mm |
| Stacking speed | Up to 250 stacks per minute |
| Cycle time | 1 to 60 seconds, adjustable |
| Control system | PLC control with touch screen interface |
| Core components | PLC |
| Power | 30~60 W |
| Power supply | 220V / 380V, 50/60 Hz |
| Grounding | 220V grounding, 24V grounding |
| Construction material | High-strength structural steel |
| Material compatibility | Suitable for various EI lamination materials |
| Machine weight | 70 kg |
| Load weight | 40 kg to 100 kg |
| Operating temperature | 0°C to 45°C |
| Safety features | Emergency stop, safety guards |
| Certification | CE |
| Minimum order quantity | 1 unit |
| Warranty | 12 months from shipping date |
Minimum order is one unit. Payment is by T/T. Standard delivery is 1-15 working days depending on configuration and stock position, packed in export-grade plywood cases. Installation and operator training are provided free online; on-site attendance is quoted on request.
If you are replacing a manual stacking station on a high-volume appliance or motor core line, send us your monthly core volume, current scrap rate and core drawings. We will confirm the guidance configuration, estimate the achievable stacking rate, and return a quotation with the wear-parts list attached.
Send your inquiry directly to us